 |
DEWALT 20V MAX XR Chainsaw, 12-Inch, Tool Only (DCCS620B) |
 |
DEWALT 20V MAX* XR Chainsaw Kit, 5-Ah Battery, 12-Inch (DCCS620P1) |
 |
Mini Chainsaw Cordless – KIMO Handheld Mini Chainsaw 6 Inch, Battery Operated w/ 2.0Ah Battery and Charger, 3.1Lbs One-Hand Cordless Chainsaw, Up to 40 Cuts Battery Chainsaw for Tree Trimming Wood DIY |
 |
Husqvarna 460 460R 24″ Gas Chainsaw, Orange |
 |
Greenworks 40V 12-Inch Cordless Chainsaw, 2.0Ah Battery and Charger Included 20262 |
 |
Husqvarna 120 II 16″ Gas Chainsaws, Orange |
 |
Farmertec 92cc Holzfforma Blue Thunder G660 Gasoline Chain Saw Power Head Without Guide Bar and Chain All Parts are Compatible WT MS660 066 Chainsaw with Normal Handle Bar |
 |
WORX WG322 20V Power Share 10″ Cordless Chainsaw with Auto-Tension |
 |
BLACK+DECKER 20V Max Cordless Chainsaw, 10-Inch, Tool Only (LCS1020B) |
 |
Mini Chainsaw, JPOWTECH 4 Inch Cordless Battery Powered Chain Saw 1500mAh 21V 1.5Ah Batteries and Security Lock Handheld Chainsaw for Wood Cutting, Tree Branch Pruning and Gardening (Black) |
What can I use instead of a chainsaw?
Many of the same cuts can be made with a bow saw. There’s nothing to sharpen the replaceable blades on bow saws, which are capable of handling a 10- to 12-inch tree. If you want to use a blade for small branches, you need a minimum of a 24 inch blade.
Is a 16 inch chainsaw big enough?
If you plan to use a chainsaw for jobs that are more moderate than occasional light cutting, you should consider a chainsaw with a 16- or 18-inch cutting bar. A 16- or 18-inch chainsaw is an option if you plan to cut down trees, remove shrubs or do similar work.
Can I use 5w30 for chainsaw bar?
Is it possible to use 5w30 for a chainsaw bar? 5w30 oil is the same as 10w30 oil. In the summer, the thin and low-viscosity SAE5 weight oil won’t hold onto the chain and chainsaw bar. If you choose the chainsaw bar oil alternative, you will experience a lot of oil loss and a messy worksite.
Can you use car oil in a chainsaw?
It isn’t very good for the chain or the environment. It’s vegetable based and thicker than the other brands so it doesn’t poison your garden or fling off the chain.
Are there 4 stroke chainsaws?
It is most likely. A two-stroke motor is the most common motor in chainsaws. The four-cycle chainsaws are usually large commercial models for loggers. It is not possible to put oil in the gas of a four-cycle machine.
How much should I spend on a chainsaw?
Mid-range saws are from $200 to $400 and can be used to cut firewood. Most shoppers should be able to find a high quality chainsaw for less than $200.
Is Ryobi a good chainsaw?
The lightweight nature of the chainsaws makes them a popular choice for customers. They are a lot easier to use than other chainsaws. Their prices are similar to heftier saws. They are usually easy to use and have adequate power.
Can a chainsaw cut a 2×4?
The most accurate tool in the shop is not a chainsaw. You can use this method to make a level cut. If you want to cut a log or pole, you can build a square jig using 2 x 4s and a level.
Can you cut a 4×4 with a chainsaw?
The best way to cut through a 4×4 is by using a slide saw, but it isn’t always available. It is possible to make precision cuts with other tools, such as chainsaws, and even handsaws.
Can electric chainsaw cut trees?
A chainsaw can cut trees and logs in a matter of seconds. The chain saw has an electric motor.
How big a tree can a 20 chainsaw cut?
There would be 20 chainsaws cutting through the tree. 16 chainsaws would be used to cut through the tree. There is a 10 inch chainsaw in this picture. It is possible to cut a 4′′ diameter with a 6 inch chainsaw.
Is a 20 inch chainsaw too big?
Medium-duty chainsaws in the 16”-20” range are a better choice if you want to cut down smaller trees. If you are looking for a chainsaw that can do heavy-duty cutting, 22” and above might be better.
Are Chinese chainsaws any good?
Inexpensive chainsaws made in China have attracted a lot of interest in the past few years. It is easy to find these and other cheaply made chainsaws on various internet sites, but they are usually not worth the risk of a bad-performing saw just to save a few dollars.
How tight should a chainsaw chain be?
You can’t pull the drive links out of the bar nose of a properly-tensioned chainsaw chain if the chain is loose.
Can I use 10w30 in chainsaw?
If you don’t have bar and chain oil, regular 10w30 motor oil can be used on the chainsaw. If you are using a chainsaw, 10w30 oil will be able to hold up to the force of the force.
Can I use 5w 20 in a chainsaw?
You can use motor oil in a pinch, but it’s not as thick as bar oil. The bar oil is sticky and thick and can be used on bars.
Can you use transmission fluid for chainsaw bar?
Sometimes I use tranny fluid to clean out old oil in chainsaws. It works well, that’s what it does. The tranny fluid seems to work better on saws with oilers in the cold weather.
What is a pocket chainsaw?
A pocket chainsaw is needed in these situations. The chainsaw blade is up to 36 inches in length with two nylon handles that allow the operator to cut through branches and medium-size trees.
What’s a good substitute for chainsaw bar oil?
If you do not have access to vegetable oil, canola oil is a good substitute. It protects your chainsaw bar and chain from damage. If you keep it well oiled, that’s all that’s needed. Canola oil does a better job of handling cooler weather than vegetable oil.
Can you use vegetable oil in a chainsaw?
It is possible to get vegetable oil for lumberjacks. In the past, most operators used oil that was derived from fossil fuels. Rapeseed-based oil is the most common chain and bar lubricant.
Can you use wd40 on a chainsaw?
If you want to soak it for 10 to 15 minutes, use the WD-40® Specialist® Fast acting Degreaser. Next, use a wire brush to remove the dirt and then wipe it off with a paper towel.
Are most chainsaws 2-stroke?
The two-stroke and four-stroke versions of the chainsaw engines are available. Two-cycle and four-cycle engines are the same thing. There is no need for oil to be put into the gas the engine runs on.
Are Husqvarna chainsaws 2-stroke?
The proper ratio of fuel and engine oil is what makes a two-stroke engine run best. The fuel mixture is different from the gas you put in your car. The engine can be damaged if you use other types of fuel.
What is the difference between a 2-stroke and 4 stroke?
In a 2-stroke engine, the five functions of the cycle can only be completed in two strokes of the engine’s pistons. There are five functions in a 4-stroke engine that need four strokes of the engine’s pistons.
What’s the biggest chainsaw you can buy?
One of the most powerful chainsaws in the world can be found from Husqvarna. Extreme logging, portable saw mills and stump work are some of the applications for the 3 120.
Is Stihl a good chainsaw?
One of the most trusted brands in power tools, and specifically chainsaws, for almost 100 years, is the one that is owned by the same family for more than 100 years. The best chainsaws are powerful, comfortable to use, and affordable. There are quirks to the brand that make it great.
Are Homelite and Ryobi the same?
If the part number on your machine is the same as the part on the other machine, it’s not a problem.
Is Echo a good chainsaw brand?
One tester said that they build good, honest equipment. That’s the crux of it all. The best action on its chain-brake lever iscrisp, with no slop. The engine operates with a broad Torque curve and that power shines through in the tough cuts.
What happens if you hit a nail with a chainsaw?
If chainsaw teeth occasionally come in contact with a nail hidden inside the wood, they can cut through the nail with consequences. If you accidentally cut a nail with your chainsaw, metal-on-metal contact will cause it’s teeth to get dull.
Can a chainsaw cut metal?
It’s not a good idea to use a chainsaw to cut metal at home. A circular saw with metal cutting blades is one type of metal cutting saw that could be considered. It’s not a good idea to use a home-sized chainsaw to cut metal.
Is chainsaw milling worth it?
If your bar reaches across the log, you can cut it into lumber. A chainsaw mill can be used to cut wide slabs from trees. This could be used to build tables with a single slab top.
Is milling your own lumber worth it?
For a fraction of the cost of a lumber dealer, you can mill your own lumber. If you purchase your own mill, you can make money by selling lumber to other woodworkers and by offering to mill other people’s logs.