Does Chainsaw Chain Gauge Matter?

The strength of a chain’s drive links is determined by the gauge measurement of a saw chain. Heavy drive links are usually stronger than thin links. To maximize cutting speed, weight needs to be kept at a minimum.

What is the difference between .325 and 3/8 chain?

The bigger teeth of the three-eighths chain make it easier to sharpen. A three-eighths-inch chain is used for saws under 40cc. Move to the other side of the street. The saws have a chain of between 40 and 60cc.

What does a chainsaw depth gauge do?

If you want to file your chainsaw’s teeth down to the same height, you need a flat surface across the teeth of your chainsaw. Step 1 is to place a round file on a tooth on the left hand side and pull it across the tooth with a 45 degree angle.

What chainsaw pitch is best?

The biggest and most aggressive chainsaw chains are used by professional harvesters. There is a. The timber is cut on a large scale with the help of 404 chains. Excellent performance can be achieved with it being the fastest cutting chainsaw chain.

See also  8 Best Chainsaw Forest King

How do I know if my chainsaw chain is tight enough?

The chain should feel snug, but it still pulls. The “snap” test is to make sure the saw chain is tensioned correctly. Pull the chain on the underside of the guide bar so that one or two drive links can be released from the guide bar rails. The chain needs to be in position.

How do I know what size chain I need for my chainsaw?

To get the correct size, you need to count 3 rivets on the chain and measure the distance between them. If you divide this by half, you will get your size. A pitch of 14 inch is given by three rivets that measure 12 an inch across divided by two.

Why do Loggers Run chainsaw bars upside down?

The chainsaw bars are mounted upside down or right side up. The user will be able to extend the life of his chainsaw bar by 50%. The areas that are heavily used will get some relief from wear and tear if the bar is flipped.

What type of chain do loggers use?

Professional woodcutters prefer semi-chisel teeth chains because they are a good option for home users. The teeth chain is rated for reduced kickback.

Can you over tighten a chainsaw?

The bar on the chainsaw has a tension screw on it. If you want to tighten the chain, turn it clockwise and thencounterclockwise. This could cause the chain to break, so don’t tighten the chain too much.

How often should you tighten chainsaw chain?

You may need to tighten the chain twice or three times during a typical afternoon wood-cutting session. It’s easy since you don’t have to disassemble the saw. If you want to tighten, keep a scrench close to you.

See also  Should My Chainsaw Smoke?

Why does my chainsaw smoke when cutting?

The dull chain exerts a lot of pressure on the bar and chain in order to make the chain saw cut. A lack of bar and chain oil, or an inferior type of oil that is being slung off the chain, could be the reason for this.

What does the pitch of a chain mean?

The distance between any three consecutive rivets divided by two is referred to as the chain pitch. The smallest, most popular, and largest pitches are used to make the chain.

Will any chain fit my chainsaw?

Different brands of chainsaw chains aren’t interchangeable with each other. You need to know the gauge, length, and pitch of the old chain to replace it with another brand. If the wrong chain is installed it can cause injury to the machine.

error: Content is protected !!