The main power switch needs to be in the ON position for the remote to work. The power to the appliance is turned on when the power button is pressed. The appliance will be turned off if the powerbutton is pressed again.
How do you turn on an electric fireplace?
Life is made simpler by electric fireplaces. They don’t have any smoke, gas or fire. Just like you would any other appliance, you can plug yours into the wall outlet. Press the button and the fireplace will be turned on.
Why is my electric fireplace not lighting up?
The motor flame problem could be caused by the circuit breaker tripping. The solution to this problem can be done in a few simple steps. Go to other parts of the electric fireplace after you check the circuit breaker and fuse. Make sure there are no loose connections with the cables.
How do you turn on fireplace with remote?
Today’s gas fireplaces are usually controlled with a remote control, meaning it’s easy to start them. There is a button on the control panel of the fireplace if you don’t have a remote.
How do electric start fireplaces work?
Electric fireplaces work by drawing in cool air, heating it internally using a heating coil and gently forcing the warmed air back out into the room through a fan. Some electric fireplaces use technology to heat objects in the room.
How do you turn the heat on a Napoleon fireplace?
The control panel and power switch can be found on the top of the appliance.
How does remote control work on fireplace?
The remote control gas fires work with a battery operated or mains connected control valve that responds to the remote control. They come with standard controls on the appliance itself, which means you don’t have to use the remote control to operate the fires.
How do I reset my electric fireplace?
The unit should be unplugged from the wall for 5 minutes after all the switches are turned on. You can try again after 5 minutes.
How do you manually turn on a fireplace?
The knob should be turned from the off to thePilot position. Push in the pilot knob and it will send gas to the system. The igniter button needs to be pushed once a second. Depending on how long it has been since the gas fireplace was last used, it may take multiple attempts to start it.
Why is my fireplace clicking but not lighting?
If your fireplace doesn’t light, it’s time to check the pilot light. Downdrafts and a worn-out pilot light can prevent your gas fireplace from starting. You will need a repair pro to fix the light.
What do the buttons on my electric fireplace mean?
The fireplace has a power button on it. The power button can be used to put the insert in a back up mode. All functions will be turned off at the same time, but the settings will remain in the memory. The unit will turn on at the same settings if you press the power button a second time.
How do you use a fireplace for beginners?
Two pieces of firewood should be placed on the grate. You need to crumple the newspaper between the firewood. The kindling needs to be placed on top. Make sure to leave enough room for air to circulate around the logs by adding more firewood on top of them.
How do you turn on an electric gas fireplace?
Electricity can be used to ignite and adjust the flames of a gas fireplace. If you push the button or flip the switch to the “on” position, you will be able to start the unit.