How do you turn on a Napoleon electric fireplace?
The main power switch needs to be in the ON position for the remote to work. The power to the appliance is turned on when the power button is pressed. The appliance will be turned off if the powerbutton is pressed again.
How do I turn on my electric fireplace?
Life is made simpler by electric fireplaces. They don’t have any smoke, gas or fire. Just like you would any other appliance, you can plug yours into the wall outlet. You can turn the fireplace on by pressing a button.
Why won’t my electric fireplace heat up?
All connections should be checked to make sure they have good contact. Look for wires that have been damaged. The flame motor probably needs to be replaced if everything looks good inside. The manufacturer of your fireplace’s flame motor might be able to give you specific information.
What is the button for on my fireplace?
A wall switch control panel is required for many gas fireplaces to be activated. The pilot should go off if you push the button.
How do you use a fireplace for beginners?
Two pieces of firewood should be placed on the grate. Put the newspaper between the firewood. The kindling needs to be placed on top. Make sure to leave enough room for air to circulate around the logs by adding more firewood on top of them.
How do I control the heat in my fireplace?
Above the fireplace opening is where the handle to open and close the damper should go. If you slide it to the right, you will be able to open it. If you want to create fires that produce more heat, open the damper wide. The amount of air reaching the fire will be increased by a wide open damper.
Can you leave an electric fireplace on all the time?
It’s a good idea to leave an electric fireplace insert on overnight but turn it off when possible. Basic safety precautions should be observed when using an electric fireplace.
Can an electric fireplace be left on all the time?
The electric fireplace could start a fire if you leave it on all night. It’s also why you should never leave your electric fireplace unattended while it’s on.
Do electric fireplaces use a lot of electricity?
How much electricity do electric fireplaces use? Electric fireplaces use the same amount of electricity as a space heating appliance. Since most fireplaces use a standard household outlet for power, they use 120 volts to power the internal heater and draw 1,500 watt at 12.5 Amp.
How do you turn on a Napoleon heater?
The pilot should be lit, depress and turn the gas knob counter-clockwise. Push and turn the knob if you have a flame adjustment valve. If you have a remote on-off switch, the main burner won’t come on when you turn it on.