What Size Chain Do I Need For My Chainsaw?

How do I know what size chainsaw chain I need?

To get the correct size, you need to count 3 rivets on the chain and measure the distance between them. If you divide this by half, you will get your size. A 14 inch pitch is given by three rivets that measure 12 an inch across divided by two.

How do I know what inch chain I need?

The distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw’s case is measured. A tape measure will let you know what’s happening. If the figure was not even, round it up to the closest number. The bar measurement is the number that comes after it.

What is the most common chainsaw chain size?

The gauge chains on most chainsaws are 0.058″ and 1.3mm. 0.043″ and 0.063″ are not as common.

See also  Can A Chainsaw Fuel Filter Be Cleaned?

What size file do you need for a 3/8 chain?

These are the file sizes that are acceptable. A 5/32 (4mm) chainsaw chain file is the same as a 325 pitch chainsaw chain file. A chainsaw chain file is about 3 inches in diameter.

Can I use any chain for my chainsaw?

Different brands of chainsaw chains aren’t interchangeable with each other. You need to know the gauge, length, and pitch of the old chain to replace it with another brand. If the wrong chain is installed it can cause injury to the machine.

How do you measure the bar and chain on a chainsaw?

The bar’s tip is where you should place a tape measure. Go back to the point where the bar entered the chainsaw. The measurement should be rounded up to the closest number.

What thickness chain should I get?

You can make your chain as thin as 1mm for the smallest pendants. Your chain should be around 3 to 5mm thick if you have a pendant that is less than half a dollar. Mid-sized pendants can be worn with chains 6mm+ thick.

What is the difference between .325 and 3/8 chain?

The three-eighths chain is a better choice for a saw with more power. It requires more power to operate because of its larger teeth and heavier chain. Older saws have a three-eighths chain and are cheaper than their newer cousins.

What does 73 mean on a chainsaw chain?

The pitch is either.058 or 1.5mm. 75 is the percentage of pitch.063 gauge or 1.6mm. The pitch is either.050 gauge or 1.3mm.

Are all 18 inch chainsaw chains the same?

Not every bar and chain will fit on the machine. The correct specification for chainsaw chains is needed for your bar. It won’t fit if you have a chain that’s too long or narrow.

See also  How To Chainsaw A Tall Tree?

What does 3/8 mean on a chainsaw chain?

Measure between the middle points of 3 rivets on the chain and divide the number by 2 if you decide to do it yourself. The measurement between three links is 1/300. It’s 75″ and it’s 3/8″. When divided by 2, it adds up to 355″).

How do I know what size chain is on my Stihl chainsaw?

The number on the side of the chain can be used to determine pitch, gauge, and other characteristics of the chain. You have a chain with the number 33RM2 stamped on it. The characteristics of the chain are marked by the last three numbers.

Are all 18 inch chainsaw chains the same?

Not every bar and chain will fit on the machine. The correct specification for chainsaw chains is needed for your bar. It won’t fit if you have a chain that’s too long or narrow.

How many drive links in a 16 inch chainsaw?

There are links to the Oregon Chainsaw chain on Amazon. The pitch is 0.063 and it is used for patio, lawn and garden.

error: Content is protected !!